Xerox Phaser 3330 Service Manual page 293

Service Parts Disassembly
7. Release all of the catches from the back of the assembly.
8. Remove 3 screws (black, flanged, tap, 10 mm).
9. Release the catch under the assembly at the back.
CAUTION:
Keep the platen assembly platen-side up to prevent the scanning mechanism from
falling out.
10. Unthread the wire harness and the ribbon cable that pass through the lower scan frame and
remove the A4 Middle Platen
11. Remove the platen glass
4-108 Phaser 3330 and WorkCentre 3335/3345
Service Manual
(Parts List 9.2 WorkCentre 3335/3345
(Parts List 9.2 WorkCentre 3335/3345
Platen, PL 9.2.7).
Platen, PL 9.2.5).
Xerox Internal Use Only