Print Process; Toner Cartridge - Xerox Phaser 3330 Service Manual

Print Process

Toner Cartridge

This printer uses a Laser Scanning Unit (LSU), Toner Cartridge and OPC Drum Cartridge, Transfer Roller,
and Fuser for mono printing. The Toner Cartridge consists of the toner supply and is transferred to the
OPC Drum Cartridge for development.
• Operating condition: Temp 10~30
• Developing Method: Non magnetic single element contact method
• Toner: Non magnetic, single element toner
• The life span of toner (ISO 19752 pattern / A4 standard)
– Initial toner: 2.6K (Sold)
– Initial toner 11.0K (Metered)
– For Replacement Cartridge information refer to
Toner Residual Sensor: Dot count with CRUM(CRU Monitor)
•
OPC Cleaning: Collect the toner with cleaning blade
•
• Handling of wasted toner: Collect wasted toner in the cleaning frame
• Toner Cartridge: CRUM identifier.
Paper
Path
Heat Roller
Fuser
Toner Cartridge Components
Item
Charge Roller
Cleaning Blade
Doctor Blade
Developer Roller
Xerox Internal Use Only
° C (50~86° F
Charge Cleaning Roller
Charge
Roller
Cleaning
Blade
Pressure
Roller Drum OPC
Item
Supply Roller
Charge Cleaning Roller
Agitator 1
Agitator 2
), Humidity 20~85% RH
Xerox Supplies and
Laser Unit
Supply Roller
Transfer
Developer Roller
Roller
Phaser 3330 and WorkCentre 3335/3345
General Information
Accessories.
Doctor Blade
Agitator 1
Agitator 2
Drum Cartridge
s3320-240
Service Manual
1-27