Sensors And Switches; Out-Bin Full Sensor - Xerox Phaser 3330 Service Manual

Service Parts Disassembly

Sensors and Switches

Out-bin Full Sensor

Parts List 1.1 Phaser 3330 Top Cover
Cover
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section
2. Undock the printer from the optional Tray 2 Base.
3. Remove the Front Door
4. Remove the Scanner Assembly, WorkCentre 3335/3345 only,
5. Remove the Left Cover,
6. Remove the Top Cover, Phaser 3330 only,
7. Remove the Lower Middle Cover, WorkCentre 3335/3345 only,
8. Unplug the Out-bin Full Sensor P/J39 connector and remove the sensor
Top Cover, PL 1.1.9) or
P/J39
4-90 Phaser 3330 and WorkCentre 3335/3345
Service Manual
or Parts List 6.2 WorkCentre 3335/3345 Middle
(page
(page 4-13).
(page 4-15).
(page
(Parts List 6.2 WorkCentre 3335/3345 Middle
4-3).
(page 4-8).
(page
4-18).
(page
4-103).
4-25).
(Parts List 1.1 Phaser 3330
Cover, PL 6.2.6).
s3320-095
Xerox Internal Use Only