Bypass Tray Retard Roller - Xerox Phaser 3330 Service Manual

Bypass Tray Retard Roller

Parts List 3.1A Frame (2 of 2)
WARNING: Do not perform repair activities with the power on or electrical power supplied to the
machine. The machine could activate and cause serious personal injury when the power is on or
electrical power is supplied.
1. Do steps 1-4 in the Preparation section
2. Undock the printer from the optional Tray 2 Base.
3. Remove the Bypass Tray
4. Disengage the tab to separate the Bypass Tray lower Assembly from the Bypass Tray upper
Assembly.
Note: There is a Catch on the underside that must be cleared to separate the Bypass Upper and
Lower Assemblies.
Tab
Xerox Internal Use Only
(page 4-3)
(page 4-32).
(page 4-8)
Catch on the
underside
Phaser 3330 and WorkCentre 3335/3345
Service Parts Disassembly
s3320-070
4-35
Service Manual