Xerox Phaser 3330 Service Manual page 78

Error Error Message
05-900 DADF Jam 0
07-130 Jam0 from Tray1
07-230 Jam0 from Tray2
08-100 Jam1
08-200 Jam in Tray 2
08-500 Jam2
08-600 Duplex Jam0
Tray and Media Errors
01-100 Door Open
07-110 Paper Empty at Tray
1
07-210 Paper Empty at Tray
2
07-220 Tray 2 cassette out
07-500 Paper empty at
Bypass Tray
07-530 Jam0 from Bypass
Tray
08-700 Output Bin full.
Toner Cartridge and Drum Cartridge Errors
Xerox Internal Use Only
Cause
The loaded document has
jammed in the document
handler.
Paper jam detected while
feeding from Tray 1.
Paper jam detected while
feeding from Tray 2.
Paper jam in the Registration
area.
Paper jam detected in the
Tray2 feed roller area
Paper jam detected in the
Fuser area.
Paper jam detected in
Duplex Tray.
The front cover closed.
While feeding from Tray 1
paper has gone empty.
While feeding from Tray 2
paper has gone empty.
Tray 2 is open.
Bypass Tray empty while
trying to feed paper.
Paper Jam while feeding
from Bypass Tray
The Output Bin Full sensor
detected tray is 90% full.
Initial Action
Open Document Handler
Cover and remove
jammed media.
Open Tray 1 and remove
the jammed paper.
Open Tray 2 and remove
the jammed paper.
Open the Rear Cover.
Remove jammed paper.
Close Rear Cover.
Remove Tray 2 from the
machine.
Remove jammed sheet
and insert Tray into
machine.
Open the Rear Cover.
Open Inner Cover.
Remove the jammed
paper.
Close covers.
Remove duplex tray.
Remove jammed paper.
Re-install duplex tray.
Close and latch the front
cover.
Load required paper stock
in Tray 1.
Load required paper stock
in Tray 2.
Close Tray 2 until it locks
into place.
Load the Bypass Tray.
Open the Front Door and
clear the jam.
Remove prints from the
Output Tray.
Phaser 3330 and WorkCentre 3335/3345
Troubleshooting
Go To
ADF/DADF
Jam
Tray 1
Paper Jam
Tray 2
Paper Jam
Jam Inside
Machine
Tray 2
Paper Jam
Jam In
Fuser Exit
Area
Duplex Jam
Door is
Open
Tray 1
Empty
Tray 2
Empty
Bypass
Empty
Bypass Tray
Paper Jam
Output Bin
Full
2-19
Service Manual