Service Parts Disassembly
Overview
This section contains the removal procedures for field-replaceable parts listed in the Parts List. In most
cases, the replacement procedure is simply the reverse of the removal procedure. In some instances,
additional steps are necessary and are provided for replacement of the parts. For specific assemblies
and parts, refer to Chapter 5.
Standard Orientation of the Printer
When needed, printer orientation is called out in the procedure as an aid for locating the printer parts.
The following figure identifies the Front, Rear, Left, and Right sides of the printer.
4-2
Phaser 3330 and WorkCentre 3335/3345
Service Manual
Xerox Internal Use Only