Maintenance Items; Consumables - Xerox Phaser 3330 Service Manual

Maintenance Items

Routine maintenance items are parts or assemblies that require periodic replacement. These items are
typically customer replaceable (CRU).
The listed items have limited life and require periodic replacement.
Item
Pick Up Roller (Tray 1)
Pick Up Roller (Optional Tray 2)
Retard Roller (Tray 1)
Retard Roller (Optional Tray 2)
Transfer Roller
ADF Separator Pad Assembly
DADF Feed Roller Assembly
Print life is based on "typical" office printing and 5% coverage per color on 24 lb. paper. Print life
figures are not guaranteed and varies depending on usage habits. Imaging Unit print life is based on 3-
page jobs using letter-size paper. Less than 3 page average run length has an adverse effect on yield.

Consumables

Consumables consist of a Toner Cartridge and a Drum Cartridge. The machine ships with a starter
toner and drum cartridge.
The system has a CRUM (Customer Replaceable Unit Monitor) to record regional and toner usage
information. The CRUM maintains a count of the amount of toner consumed. When the count reaches
set values, warning and error messages appear to notify the user when near and end of life status is
reached.
Note: Life ratings are based on A4 or A-size sheets at 5% coverage.
Note: Starter capacity cartridges are packaged with the printer when shipped from the factory.
These starter cartridges are not available for order.
Standard, high-capacity, and extra high-capacity Toner Cartridges are available for ordering.
Additional Drum Cartridges are also avaiable for ordering. See
for a Toner Cartridge and Drum Cartridge life and ordering information.
Xerox Internal Use Only
Print Life
Up to 60,000 pages
Up to 100,000 pages
Up to 60,000 pages
Up to 100,000 pages
Up to 100,000 pages
Approximately 20,000 sheets
Approximately 20,000 sheets
Consumables and Maintenance Items
Phaser 3330 and WorkCentre 3335/3345
General Information
1-35
Service Manual