Optional Tray 2 Main Motor - Xerox Phaser 3330 Service Manual

Optional Tray 2 Main Motor

Parts List 12.3 Optional Tray Frame ETS
1. Disconnect the Optional Tray harness.
2. Lift printer from the optional Tray.
3. Remove the Optional Tray 2 Right Side Cover
4. Unplug the motor connector, and remove 4 screws.
5. Release the Optional Tray 2 Main Motor
Xerox Internal Use Only
(page 4-149).
(Parts List 12.3 Optional Tray Frame
Phaser 3330 and WorkCentre 3335/3345
Service Parts Disassembly
ETS, PL 12.3.7).
4-151
Service Manual