Uneven Density - Xerox Phaser 3330 Service Manual
Hide thumbs
Also See for Phaser 3330:
- User manual (114 pages) ,
- System administrator manual (92 pages) ,
- Quick use manual (5 pages)
Table of Contents
Advertisement
Uneven Density
Print Density is uneven between left and right.
Initial Actions
•
Check that the Roller is properly installed.
•
Check that the media is dry and in good condition.
•
Clean the laser window.
Troubleshooting Reference Table
Applicable Parts
• Toner Cartridge, Refer to
Accessories.
•
Transfer Roller (PL3.1A.40,
(2 of
2))
• HVPS (PL3.1A.33,
Parts List 3.1A Frame (2 of
Troubleshooting Procedure Table
Step
Actions and Questions
1.
Check the high voltage contacts on the Toner
Cartridge for damage.
The contacts are undamaged.
2.
Replace the Transfer Roller (PL3.1A.40,
List 3.1A Frame (2 of
Does the error persist?
Xerox Internal Use Only
Xerox Supplies and
Parts List 3.1A Frame
2))
Parts
2))
Example Print
Density Uneven or Wrong (Scan Direction)
Yes
Go to step 2.
Replace the HVPS
(PL3.1A.33,
Parts List
3.1A Frame (2 of
2)).
Phaser 3330 and WorkCentre 3335/3345
Image Quality
No
Replace the Toner
Cartridge. Refer to
Xerox
Supplies and Accessories
Complete.
3-13
Service Manual
Advertisement
Table of Contents
Troubleshooting
