Service Parts Disassembly
Optional Tray 2 Lift Assy
Parts List 12.3 Optional Tray Frame ETS
1.
Disconnect the Optional Tray harness.
2.
Remove the Optional Tray 2 Right Side Cover
3.
Open the harness clamps.
4.
Disconnect the connectors from the Optional Tray 2 PWB.
5.
Remove 8 screws and the screw holding the locking pin.
6.
Remove the Locking Pin
7.
Lift the Optional Tray 2 Lift Assy. from under the Tray Borad.
8.
Disconnect the Lift Assembly's plug/jack and remove the Optional Tray 2 Lift Assembly.
4-156
Phaser 3330 and WorkCentre 3335/3345
Service Manual
(page
4-149).
Disconnect the connectors (2)
Locking Pin
Xerox Internal Use Only