Setting Up The Instrument; Bench Operation - R&S NGL200 Series Getting Started

®
R&S NGL200/NGM200
Risk of damage during transportation and shipment
Insufficient protection against mechanical and electrostatic effects during
transportation and shipment can damage the instrument.
● Always ensure that sufficient mechanical and electrostatic protections
are provided
● When shipping an instrument, the original packaging should be used. If
you do not have the original packaging, use sufficient padding to pre-
vent the instrument from moving around inside the box. Pack the instru-
ment in antistatic wrap to protect it from electrostatic charging
● Secure the instrument to prevent any movement and other mechanical
effects during transportation
Delivery package
The package contents contain the following items:
● R&S NGL power supply or R&S NGM power supply
● Four power cables
● One printed Getting Started manual
● One document folder containing a printed Basic Safety Instructions guide
3.4

Setting Up the Instrument

The R&S NGL/NGM is designed for benchtop and rackmount operation.
3.4.1

Bench Operation

On a benchtop, the R&S NGL/NGM power supply can either lie flat or stand on its
feet. As shown in
instrument in an inclined position.
Getting Started 1178.8720.02 ─ 04
Figure 3-1, feet on the bottom can be folded out to set the
Putting into Operation
Setting Up the Instrument
14