®
R&S
NGL200/NGM200
[SOURce:]VOLTage:PROTection:TRIPped? <state>
Queries the OVP state of the selected channel.
Example:
Usage:
7.5.11 OPP Setting
The POWer:PROTection subsystem contains the commands for setting the over-
power protection parameters for the output channels. The default unit is W.
User Manual 1178.8736.02 ─ 06
See
Example "Configuring the overvoltage protection"
on page 122.
VOLT:PROT:TRIP?
Response 1, the OVP is tripped.
Response 0, the OVP is not tripped.
Query only
Remote Control Commands
Configuration Commands
124