Siemens SINUMERIK 828D Commissioning Manual page 1151

<!-- End of animation definition -->
</SceneKey>
Description
</SceneKey>
<!-- Existing animation as source for a new animation -->
<SceneKey source=''BoringAnimation' name=''BoringAnimationRear' mirror='
MirrorScreenX ' />
Description
<SceneKey source=''BoringAnimation'
name=''BoringAnimationRear'
mirror=' MirrorScreenX ' />
<!-- Definition of a static scene (screen), (four examples) -->
<SceneKey name='Default' time='0.026' view='camiso'
type="VIEW_3D_DRILL_CUT"/>
<SceneKey name='Cut' time='0.046' view='camside' type="VIEW_SIDE"/>
<SceneKey name='Z1ink' time='0.056' view='camside' type="VIEW_SIDE"
highLightedGroup='dad_Z1ink'/>
<SceneKey name='Z1abs' time='0.066' view='camside' type="VIEW_SIDE"
highLightedGroup='dad_Z1abs'/>
Description
<SceneKeyname='Z1abs'
time='0.066'
view='camside'
type="VIEW_SIDE"
highLightedGroup='dad_Z1abs'/>
<!-- End of xml file –!>
SINUMERIK Integrate Run MyScreens
Programming Manual, 10/2015, 6FC5397-3DP40-5BA3
End of the animation definition
Name of an animation that is to use another
animation as its source.
Name of the new animation based on the
source
Mirroring in the direction of the X axis, output
is in the new animation.
Screen name
Time of the screen on the time sensor
Camera to be used for the screen
View type defines the view (see Section View
type (Page 222))
Name of the group to be highlighted. The group
has been called "Z1abs" in Flux Studio. The
prefix "dad_" is automatically added by Flux.
Animated elements
C.3 XML commands
221