Table of Contents
Advertisement
Default level
2: System level
Parameters
seconds: Interval (in seconds) for a bundle link to send hello message, in the range 1 to 180.
Description
Use the mfr timer hello command to set the interval for a frame relay bundle link to send hello message.
Use the undo mfr timer hello command to restore the default.
By default, the interval for a frame relay bundle link to send hello message is 10 seconds.
You can configure this command only after the link-protocol fr mfr command is used to associate a frame
relay bundle link interface with a frame relay bundle.
Examples
# Set the bundle link Serial 4/1/8:10 to send hello message once every 15 seconds.
<Sysname> system-view
[Sysname] interface Serial 4/1/8:10
[Sysname-Serial4/1/8:10] link-protocol fr MFR 4/1/6
[Sysname-Serial4/1/8:10] mfr timer hello 15
reset counters interface
Syntax
reset counters interface [ mfr [ interface-number | interface-number.subnumber ] ]
View
User view
Default level
2: System level
Parameters
interface-number: MFR interface number.
interface-number.subnumber: MFR subinterface number. The interface-number argument is the main
interface number, and the subnumber argument is the subinterface number, ranging from 0 to 1023.
Description
Use the reset counters interface command to clear statistics of the specified or all MFR interfaces.
To collect statistics spanning a specific period for an interface, you need to clear statistics of the interface
before starting statistics collection.
If you do not specify mfr, this command clears the statistics of all interfaces.
If you specify the mfr but not an interface number, this command clears the statistics of all MFR interfaces.
If you specify both mfr and an interface number, this command clears the statistics of the specified MFR
interface.
Examples
# Clear statistics of interface MFR4/1/6.
<Sysname> reset counters interface MFR 4/1/6
94
Advertisement
Table of Contents
