Table of Contents
Advertisement
Field
Remove_link_ack(TX/RX)
Pkts dropped(in/out)
Timer: Ack 4
Hello 10
Retry: max 2
Current 0
Cause code
Bundle Link fragment statistics
Mfr fragment(in/out)
interface mfr
Syntax
interface mfr { interface-number | interface-number.subnumber [ p2mp | p2p ] }
undo interface mfr { interface-number | interface-number.subnumber }
View
System view
Default level
2: System level
Parameters
interface-number: MFR interface number.
interface-number.subnumber: MFR subinterface number, of which, interface-number is the main interface
number, and subnumber is the subinterface number. The value range for the subnumber argument is 0 to
1023.
p2mp: Point-to-multipoint subinterface.
p2p: Point-to-point subinterface.
Description
Use the interface mfr command to create a multilink frame relay bundle interface or subinterface and
enter the interface view.
Use the undo interface mfr command to delete a specified multilink frame relay bundle interface or
subinterface.
Description
Number of transmitted and received Remove_link_ack
messages.
Remove_link_ack messages are sent notifying receipt
of the Remove_link messages.
Number of dropped incoming and outgoing packets.
Time waiting for a Hello_ack message before a Hello
message or an Add_link message (for initial
synchronization) is retransmitted on the bundle link.
Intervals for sending Hello messages.
Maximum number of Hello or Add_link sending retries
made when no Hello_ack or Add_link_ack is received
on the bundle link.
Number of retries.
Cause resulting in the current state of the bundle link.
Fragment statistics on the bundle link.
The number of fragments sent/received by the bundle
link.
88
Advertisement
Table of Contents
