Table of Contents
Advertisement
service ubr
Syntax
service ubr output-pcr
undo service
View
PVC view
Default level
2: System level
Parameters
output-pcr: Peak cell rate (PCR) in kbps of outputting ATM cells. For the value ranges of this parameter,
see
Table
6.
Description
Use the service ubr command to specify the service type on the current PVC as unspecified bit rate (UBR)
and specify the related rate parameters.
Use the undo service command to restore the default.
The default service type of a PVC is UBR.
You can configure the service type and related rate parameters for a PVC with this command, the service
vbr-nrt command, the service vbr-rt command, or the service cbr command. The new configuration will
replace the old configuration.
Related commands: service vbr-nrt, service vbr-rt, and service cbr.
Examples
# Create a PVC named aa with the VPI/VCI of 1/101.
<Sysname> system-view
[Sysname] interface Atm 3/1/1
[Sysname-Atm3/1/1] pvc aa 1/101
# Specify the service type of the PVC as UBR and the PCR as 100000 kbps.
[Sysname-atm-pvc-Atm3/1/1-1/101-aa] service ubr 100000
service vbr-nrt
Syntax
service vbr-nrt output-pcr output-scr output-mbs
undo service
View
PVC view
Default level
2: System level
23
Advertisement
Table of Contents
