Table of Contents
Advertisement
Default level
1: Monitor level
Parameters
mp-number: Number of an existing multilink point to point protocol group (MP-group) interface.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
down: Displays information about interfaces in the DOWN state and the causes. If you do not specify
this keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display interface mp-group command to display the information about an existing MP-group
interface.
If you do not specify the mp-group keyword, this command displays information about interfaces on the
device.
If you specify the mp-group keyword without the mp-number argument, this command displays
information about all existing MP-group interfaces.
Examples
# Display information about interface MP-group 3/1/1.
<Sysname> display interface Mp-group 3/1/1
Mp-group3/1/1 current state: UP
Line protocol current state: UP
Description: Mp-group3/1/1 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 5.1.0.1/24 Primary
Link layer protocol is PPP
LCP opened, MP opened, IPCP opened
Physical is MP, baudrate: 768000 bps
Last clearing of counters:
Last 300 seconds input rate: 48 bytes/sec, 384 bits/sec, 2 packets/sec
Last 300 seconds output rate: 42 bytes/sec, 336 bits/sec, 2 packets/sec
594447 packets input, 11254154 bytes, 0 drops
579254 packets output, 9807856 bytes, 0 drops
# Display brief information about interface MP-group 3/1/1.
<Sysname> display interface Mp-group 3/1/1 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
17:34:17 Mon 08/07/2009
Link Protocol Main IP
38
Description
Advertisement
Table of Contents
