H3C SR8800 Command Reference Manual page 94

10g core routers, layer 2 - wan
Hide thumbs Also See for SR8800:
Table of Contents

Advertisement

Examples
# Display configuration and statistics about all multilink frame relay bundles and bundle links.
<Sysname> display mfr
Bundle interface:MFR3/1/1, Bundle state = up,
fragment disabled
original packet be assembled/fragmentized (in/out): 2270/113309
droped fragment (in/out): 0/0
Bundle name = MFR3/1/1
Bundle links:
Serial3/1/3:0, PHY state = up, link state = up,
Serial3/1/5:0, PHY state = up, link state = up,
Table 18 Output description
Field
Bundle interface
Bundle state
Bundle class
fragment disabled
original packet be
assembled/fragmentized (in/out)
droped fragment (in/out)
Bundle name
Bundle links
Serial3/1/3:0, PHY state = up, link
state = up, Link name :
Serial3/1/3:0
# Display detailed statistics about all multilink frame relay bundles and bundle links.
<Sysname> display mfr verbose
Bundle interface:MFR6/1/12, Bundle state = up,
fragment enabled, MFR bundle fragment size = 256
original packet be assembled/fragmentized (in/out): 0/0
droped fragment (in/out): 0/0
Bundle name = MFR6/1/12
Bundle links:
Serial6/1/8:10
Bound to MFR6/1/12 (BID:MFR6/1/12)
Physical state: up, link state: up,
Bundle link fragment size: 256,
Bundle Link statistics:
Hello(TX/RX):
Description
Bundle interface.
Operating state of the bundle interface.
Class A indicates if one bundle link in up state exists, the bundle is
flagged as up. Moreover, all bundle links should be tagged as down
before the bundle is down.
Indicates whether the fragment is enabled (disabled in this sample
output).
Number of assembled packets received on the bundle.
interface/number of unfragmented packets before being sent by the
bundle interface.
Number of incoming and outgoing packets dropped on the bundle
interface.
Name of multilink frame relay bundle.
Physical interfaces of the links in the bundle.
Physical interface on the bundle link, the operating state of the physical
layer interface and link layer interface, the link name of the bundle link
(name on the physical interface by default).
LID : Serial6/1/8:10
10/10
Hello_ack(TX/RX):
86
Bundle class = A,
Link name : Serial3/1/3:0
Link name : Serial3/1/5:0
Bundle class = A,
Peer LID: Serial6/1/8:10
10/10

Advertisement

Table of Contents
loading

Table of Contents