<Sysname> system-view
[Sysname] interface Serial 4/1/8:10
[Sysname-Serial4/1/8:10] fr map ip 202.38.163.252 50
interface serial
Syntax
interface serial interface-number.subnumber [ p2mp | p2p ]
undo interface serial interface-number.subnumber
View
System view
Default level
2: System level
Parameters
interface-number: Main interface number.
subnumber: Subinterface number, in the range 0 to 1023..
p2p: Point-to-point subinterface.
p2mp: Point-to-multipoint subinterface.
Description
Use the interface serial command to create a subinterface and enter the subinterface view.
Use the undo interface serial command to delete a subinterface.
By default, no frame relay subinterface exists. Frame relay subinterfaces are in p2mp mode by default.
Examples
# Configure a point-to-point subinterface Serial 4/1/8:10.10.
<Sysname> system-view
[Sysname] interface Serial 4/1/8:10.10 p2p
[Sysname-Serial4/1/8:10.10]
link-protocol fr
Syntax
link-protocol fr [ ietf | nonstandard ]
View
Interface view
Default level
2: System level
Parameters
ietf: Default encapsulation format according to the Internet Engineering Task Force (IETF) standard.
nonstandard: Nonstandard compatible encapsulation format.
79