Table of Contents
Advertisement
Field
Protocol: (s) - spoofing
Interface
Link
Protocol
Main IP
Description
Cause
interface hdlc-bundle
Syntax
interface hdlc-bundle bundle-id
undo interface hdlc-bundle bundle-id
View
System view
Default level
2: System level
Parameters
bundle-id: Number of an HDLC link bundle interface. The value range for this argument is 1 to 240.
Description
Use the interface hdlc-bundle command to create an HDLC link bundle interface and enter its view. If the
HDLC link bundle interface already exists, you enter the HDLC link bundle interface view directly.
Use the undo interface hdlc-bundle command to remove an HDLC link bundle interface.
Examples
# Create HDLC link bundle interface 1 and enter its view.
<Sysname> system-view
[Sysname] interface Hdlc-bundle 1
[Sysname-Hdlc-bundle1]
Description
If the network layer protocol state of an interface is shown as UP,
but its link is an on-demand link or not present at all, the protocol
attribute includes the spoofing flag (an s in parentheses).
Abbreviated interface name.
Physical link state of the interface:
•
UP—The link is up.
•
ADM—The link has been administratively shut down. To recover
its physical state, perform the undo shutdown command.
Protocol connection state of the interface, which can be UP,
DOWN, or UP(s).
The main IP address of the interface.
Description of the interface.
The cause of a DOWN physical link. If the port has been shut down
with the shutdown command, this field displays Administratively.
To restore the physical state of the interface, use the undo
shutdown command.
60
Advertisement
Table of Contents
