Shutdown - H3C SR8800 Command Reference Manual

Parameters
interface-number: Interface number.
Description
Use the reset counters interface mp-group command to clear the traffic statistics on MP-group interfaces.
Before collecting traffic statistics within a specific period of time on an interface, you must clear the
existing statistics.
If you do not specify the mp-group keyword, this command clears statistics on all interfaces.
If you specify the mp-group keyword without the interface-number argument, this command clears
statistics on all MP-group interfaces.
Examples
# Clear the statistics on interface MP-group 3/1/2.
<Sysname> reset counters interface Mp-group 3/1/2

shutdown

Syntax
shutdown
undo shutdown
View
MP-group interface view
Default level
2: System level
Parameters
None
Description
Use the shutdown command to shut down the MP-group interface.
Use the undo shutdown command to bring up the MP-group interface.
By default, a MP-group interface is up.
Examples
# Shut down MP-group 2/1/3.
<Sysname> system-view
[Sysname] interface Mp-group 2/1/3
[Sysname-Mp-group2/1/3] shutdown
48