Table of Contents
Advertisement
If you specify both hdlc-bundle and bundle-id, this command clears the statistics of the specified HDLC
link bundle interface.
Examples
# Clear the statistics of HDLC link bundle interface HDLC-bundle 1.
<Sysname> reset counters interface Hdlc-bundle 1
shutdown
Syntax
shutdown
undo shutdown
View
HDLC link bundle interface view
Default level
2: System level
Parameters
None
Description
Use the shutdown command to shut down an HDLC link bundle interface.
Use the undo shutdown command to bring up an HDLC link bundle interface.
By default, an HDLC link bundle interface is up.
Enabling/disabling an HDLC link bundle interface does not enable or disable any member interface in
the HDLC link bundle, but the operation can affect the selected state of the member interfaces. When an
HDLC link bundle interface is disabled, no member interface can be in the selected state to forward
traffic.
Examples
# Shut down HDLC link bundle interface 1.
<Sysname> system-view
[Sysname] interface Hdlc-bundle 1
[Sysname-Hdlc-bundle1] shutdown
62
Advertisement
Table of Contents
