H3C SR8800 Command Reference Manual page 11

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display atm interface command to display the detailed information of the specified ATM main
interface or subinterface or all ATM interfaces if no ATM interface is specified.
Examples
# Display the information of interface ATM 3/1/1.
<Sysname> display atm interface Atm 3/1/1
ATM interface Atm3/1/1, State UP
Port Information:
Maximum VCs: 1024
PVCs: 5, MAPs: 1
input pkts: 0, input bytes: 0, input pkt errors: 0
output pkts: 0, output bytes: 0, output pkt errors: 0
Main interface Information:
PVCs: 4, MAPs: 1
input pkts: 0, input bytes: 0, input pkt errors: 0
output pkts: 0, output bytes: 0, output pkt errors: 0
ATM interface Atm3/1/1.1, point-to-point, State UP
Subinterface Information:
PVCs: 1, MAPs: 0
input pkts: 0, input bytes: 0, input pkt errors: 0
output pkts: 0, output bytes: 0, output pkt errors: 0
Table 1 Output description
Field
ATM interface Atm3/1/1, State UP
Port Information
Maximum VCs
PVCs
MAPs
input pkts: 0, input bytes: 0, input pkt errors: 0
output pkts: 0, output bytes: 0, output pkt errors: 0
Main interface Information
ATM interface Atm3/1/1.1, point-to-point, State UP
Sub-interface Information
Description
Name and state of the ATM interface
Information of the ATM interface
Maximum number of VCs that can be created on the
ATM interface
Total number of PVCs configured on the ATM
interface, its main interface, or each subinterface
Number of mappings on the interface, its main
interface, or each subinterface
Received packets, bytes, and errors
Transmitted packets, bytes, and errors
Information of the main interface of the ATM interface
Name, type and state of a subinterface on the main
interface
Information of the subinterface
3