Frame-Format; Interface Atm - H3C SR8800 Command Reference Manual

Examples
# Set the SDH overhead byte J0 of ATM interface ATM 3/1/1.
<Sysname> system-view
[Sysname] interface Atm 3/1/1
[Sysname-Atm3/1/1] flag j0 sdh ff

frame-format

Syntax
frame-format { sdh | sonet }
undo frame-format
View
ATM main interface view
Default level
2: System level
Parameters
sdh: Sets the framing format to SDH STM- 1 /STM-4.
sonet: Sets the framing format to SONET OC-3/OC- 1 2.
Description
Use the frame-format command to set the framing format for an ATM interface.
Use the undo frame-format command to restore the default.
By default, the framing format of an ATM interface is SDH STM- 1 /STM-4.
Examples
# Set the framing format of ATM 3/1/1 to SONET OC-3/OC- 1 2.
<Sysname> system-view
[Sysname] interface Atm 3/1/1
[Sysname-Atm3/1/1] frame-format sonet

interface atm

Syntax
interface atm { interface-number | interface-number.subnumber [ p2mp | p2p ] }
undo interface atm interface-number.subnumber
View
System view
Default level
2: System level
Parameters
interface-number: ATM main interface number.
subnumber: ATM subinterface number, in the range of 0 to 1023.
12