Table of Contents
Advertisement
interface mp-group
Syntax
interface mp-group mp-number
undo interface mp-group mp-number
View
System view
Default level
2: System level
Parameters
mp-number: MP group interface number. An MP group interface is identified by the combination of its
slot number, subcard number, and interface number. The interface number ranges from 0 to 1023.
The router does not support configuring the subcard number of an MP group to 0. For example, you
cannot create Mp-group 3/0/1.
Description
Use the interface mp-group command to create an MP group interface or enter MP group interface view.
If the specified MP group interface already exists, this command allows you to enter MP group interface
view directly.
Use the undo interface mp-group command to remove an MP-group interface.
This command must be used in conjunction with the ppp mp mp-group command. You can execute the
two commands in either order.
Examples
# Create MP-group 4/1/28.
<Sysname> system-view
[Sysname] interface Mp-group 4/1/28
[Sysname-Mp-group4/1/28]
mtu
Syntax
mtu size
undo mtu
View
MP-group interface view
Default level
2: System level
Parameters
size: MTU (in bytes), which ranges from 128 to 9216.
Description
Use the mtu command to set the MTU of the current MP-group interface.
42
Advertisement
Table of Contents
