Table of Contents
Advertisement
# Display information about all HDLC link bundle interfaces in the DOWN state.
<Sysname> display interface Hdlc-bundle brief down
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Interface
HBDL2
Table 10 Output description
Field
HDLC-bundle1 current state
Line protocol current state
Description
The Maximum Transmit Unit
Internet Address
Link layer protocol
Physical is HDLC-BUNDLE
baudrate
Output queue : (Urgent queuing :
Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing :
Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing :
Size/Length/Discards) 0/75/0
Last 300 seconds input/output rate
packets input/output, bytes, drops
The brief information of interface(s) under
route mode
Link: ADM - administratively down; Stby -
standby
Link Cause
DOWN Not connected
Description
Physical state of the HDLC link bundle interface:
•
DOWN (Administratively)—The interface is shut down using the
shutdown command.
•
DOWN—The interface is administratively up but physically
down.
•
UP—The interface is up both administratively and physically.
Link layer protocol state of the HDLC link bundle interface:
•
DOWN—The link layer protocol of the interface is down,
indicating that the HDLC link bundle probably contains no
selected member interface.
•
UP—The link layer protocol of the interface is up.
Description of the HDLC link bundle interface.
Maximum transmission unit (MTU) on the HDLC link bundle
interface.
IP address of the HDLC link bundle interface.
Link layer protocol used by the HDLC link bundle interface.
The physical type of the HDLC link bundle interface is HDLC
bundle.
Baudrate of the HDLC link bundle interface.
Traffic statistics for each output queue on the interface, including
the number of packets in the queue (the queue size), the maximum
number of packets that the queue can hold (queue length), and the
number of dropped packets.
In the sample output, the output queues on the interface include an
urgent queue, a protocol queue, and a FIFO queue.
Average incoming/outgoing traffic rate in Bps/bps/pps in the last
300 seconds.
Incoming and outgoing traffic size in packets/bytes on the
interface and the number of dropped incoming/outgoing packets.
Brief information about Layer 3 interfaces.
Link status:
•
ADM—The interface has been administratively shut down. To
recover its physical state, perform the undo shutdown
command.
•
Stby—The interface is operating as a backup interface.
59
Advertisement
Table of Contents
