H3C SR8800 Command Reference Manual page 66

10g core routers, layer 2 - wan
Hide thumbs Also See for SR8800:
Table of Contents

Advertisement

Parameters
bundle-id: Number of an HDLC link bundle. The value range for this argument is 1 to 240.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about interfaces in the DOWN state and the link down causes. If you do not
specify this keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display interface hdlc-bundle command to display information about an HDLC link bundle
interface.
If you do not specify the hdlc-bundle keyword, this command displays information about all interfaces.
If you specify the hdlc-bundle keyword without any HDLC link bundle interface number, this command
displays information about all HDLC link bundle interfaces.
Examples
# Display information about HDLC link bundle interface 1.
<Sysname> display interface Hdlc-bundle 1
Hdlc-bundle1 current state: UP
Line protocol current state: UP
Description: Hdlc-bundle1 Interface
The Maximum Transmit Unit is 1500
Internet Address is 1.1.1.2/24 Primary
Link layer protocol is HDLC
Physical is HDLC-BUNDLE, baudrate: 155520 kbps
Output queue : (Urgent queuing : Size/Length/Discards)
Output queue : (Protocol queuing : Size/Length/Discards)
Output queue : (FIFO queuing : Size/Length/Discards)
Last clearing of counters:
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
# Display brief information about HDLC link bundle interface 1.
<Sysname> display interface Hdlc-bundle 1 brief
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
HBDL1
Never
Link Protocol Main IP
UP
UP(s)
--
58
0/100/0
0/500/0
0/75/0
Description

Advertisement

Table of Contents
loading

Table of Contents