Meaning Of The Leds - Siemens SICAM Q100 Device Manual

6 Getting Started

6.6 Meaning of the LEDs

6.6 Meaning of the LEDs
7KG95xx automatically monitors the functions of its hardware and software components. The LEDs on the top
side of the housing indicate the current device status.
RUN
H1
Link/Activity
Figure 6-4
NOTE
LEDs are also located on the display side; their designations are RUN, ERROR, H1, and H2 and their functions
are the same as the functions of the LEDs on the top of the housing.
Depending on the status, the LEDs can be permanently on, flashing, or off. The states are described in
chapter 12.3. The meaning of the LEDs during normal operation is explained in the following table:
Table 6-1
LED
RUN
ERROR
H1
H2
Link/Activity
Speed
98
Designation of the LEDs
Meaning of the LEDs
Device active
Indicates an error according to parameterization
According to parameterization
According to parameterization
LED on: Ethernet link is up
LED flashing: Ethernet link is up and data are transferred
LED off: no Ethernet partners connected
LED on: 100 Mbit/s
LED off: 10 Mbit/s
Meaning
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
ERROR
H2
Speed