Table of Contents
Advertisement
✧
If you do not want to make any additional settings, continue with the Activation of the device configuration
according to section Activating the Set of Parameters. If you want to change other settings, enter the
changes and then enable the device configuration as described in section Activating the Set of
Parameters.
Download ICD/IID Files
You can download the following files (see Figure 8-58):
•
An individual IID file which contains the data of the currently parameterized network type, for example,
four-wire, any load (3P4W)
This file has the file extension iid.
•
A compressed file which contains the ICD files of all available network types, for example, 1p2W, 3P3W2I,
3P3WI3, etc.
The compressed file has the file extension *.zip and its decompressed files have the file extension *.icd.
✧
Click Download IID file.
The IID file with the data of the currently parameterized network type is downloaded to a folder which you
selected.
✧
Click Download ICD.zip file.
The ICD files of all available network types are downloaded in a .zip file to a folder which you selected.
NOTE
If the operation indication Battery Failure appears, after you restart the device, the IID file will be updated. In
this case, you must load the new IID file into your PQS.
No Ethernet Communication
✧
In the Bus protocol list box select the entry -none-.
No Ethernet protocol is available in this case.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
8 Operation at Use of a PC
8.3 Configuration of the Device
193
Advertisement
Table of Contents
