Performing The Measurement - Siemens SICAM Q100 Device Manual

Power monitoring device and class a power quality recorder
Hide thumbs Also See for SICAM Q100:
Table of Contents

Advertisement

8 Operation at Use of a PC
8.7 Example of a Parameterization and Measured Value Evaluation
Enable the active parameter set in the device as described in Activating the Set of Parameters.
NOTE
After changing the network settings and subsequent parameter activation the device will reset.
8.7.4

Performing the Measurement

Switch on the rated voltages and rated currents at the measuring inputs E and F of SICAM Q100
observing the safety notes given in chapter 6.7.
Read the measured values from the Value view and Evaluation tab by calling the Operational
parameters, Harmonics, AC power and energy, Binary outputs and Limits menu items according to
chapter 8.4 in the navigation window.
The user interface displays the status of binary output G1/2 which corresponds to the parameterized
indication Vab_>11kV.
If the parameterized limit of the voltage Vab is exceeded, a corresponding limit violation indication is
displayed in the table.
NOTE
Measured values and indications are refreshed after 5 s on the Value view and Evaluation tab.
Display the power quality events and the memory utilization on the Value view and Evaluation tab.
274
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

7kg95 series

Table of Contents