Starting The User Interface During Operation - Siemens SICAM Q100 Device Manual

8 Operation at Use of a PC
8.2 Start and Design of the User Interface
8.2.8

Starting the User Interface during Operation

Starting the User Interface
To start the user interface, proceed as follows:
✧ Start Microsoft Internet Explorer.
✧
Enter the IP address in Microsoft Internet Explorer (for example the default IP address: 192.168.0.55) of
SICAM Q100 and press ENTER.
✧ Enter the logon password (default password is 000000) and click Log on.
Figure 8-8
The user interface opens with the Information tab  Show device information item (see figure 8-9).
124
Log on via the User Interface
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018