Inputs And Outputs - Siemens SICAM Q100 Device Manual

13.1.2

Inputs and Outputs

Inputs for Alternating Voltage Measurements, Connector Block F - Cat III
Rated input alternating voltage range
Phase-N/PE
Phase-phase
Maximum input alternating voltage
Phase-N/PE
Phase-phase
Input impedances
a, b, c to N
a-b, b-c, c-a
Further information about the voltage measuring inputs
Power consumption per input for V
Permissible power frequency
Measuring error under environmental influences:
see technical data
Sampling rate
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
AC 57.73 V to 400 V (autorange)

IEC 61000-4-30 Class A: to AC 230 V: 200 %
overvoltage

> AC 230 V to 400 V: 200 % to 15 % overvoltage
UL conditions:

to AC 170 V: 200 % overvoltage

> AC 170 V to 300 V: 200 % to 15 % overvoltage
AC 100 V to 690 V (autorange)

IEC 61000-4-30 Class A: to AC 400 V: 200 %
overvoltage

> AC 400 V to 690 V: 200 % to 15 % overvoltage
UL conditions:

to AC 290 V: 200 % overvoltage

> AC 290 V to 520 V: 200 % to 15 % overvoltage
460 V (347 V for UL)
796 V (600 V for UL)
3.0 M
3.0 M
460 V 70 mW
max
42.5 Hz to 69.0 Hz
acc. to IEC 61000-4-30 Ed. 3 Class A (0.1 %)
10.24 kHz
13 Technical Data
13.1 General Device Data
321