Table of Contents
Advertisement
8 Operation at Use of a PC
8.2 Start and Design of the User Interface
NOTE
When starting the device for the first time, a set of parameters with factory settings is loaded. You can modify
these settings during the parameterization (see chapter 8.3).
To set a different user language for the user interface, open the Administrative menu on the Configure tab,
select the Device and language menu item and change the language as described in chapter 8.3.7.6.
NOTE
If the user interface does not open or the opened user interface does not show an interface as given in Figure
8-3, the reason could be that JavaScript is missing or has not been activated. The operation of user interface
requires JavaScript. You may have to activate JavaScript as described in the following chapter.
8.2.2
Enabling JavaScript
The operation of the user interface requires JavaScript.
Enable JavaScript as follows:
✧
Start Microsoft Internet Explorer.
✧
Select the Tools menu on the menu bar of Microsoft Internet Explorer.
✧
Select Internet options... from the Tools menu.
✧
In the Internet options dialog, open the Security tab.
Figure 8-2
118
Enabling JavaScript
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Advertisement
Table of Contents
