Siemens SICAM Q100 Device Manual page 170

8 Operation at Use of a PC
8.3 Configuration of the Device
8.3.6.3 Recorder Parameter
Default Settings and Setting Ranges
Table 8-14
Parameter
Average intervals - Frequency
Short term flicker
Long term flicker
Average interval - Voltage,
Unbalance and Harmonics
Record additional data (I, P, Q,
S etc.)
Recorder of average - Min
Recorder of average - Max
Harmonics parity
File generation every:
(corresponds to the setting of
the Average interval parame-
ter)
The created PQDIF files can be
downloaded via the user inter-
face or with the IEC 61850 pro-
tocol.
Recorded file type
Flicker lamp model
Tolerance unit
Tolerance number
Maximum recording interval
1)
The interval of aggregated values of harmonics and interharmonics will always synchronize with the setting
of Average interval in Measurement recorder.
170
Recorder Parameter
Default Setting
Measurement Recorder
10 s
10 min
2 h
10 min
no
no
no
Odd
1)
24 h
PQDIF
230 V
Percentage
Percentage: 3 % of primary
nominal voltage,
Numerical: 0.5 V
10 min
fixed
fixed
fixed
30 s, 1 min, 10 min, 15 min, 30 min,
1 h, 2 h
no
yes
no
yes
no
yes
Even
Odd
All
At average interval
30 s
1 min
10 min, 15 min,
30 min, 1 h or
2 h
PQDIF (see chapter 8.4.2.5)
CSV
All
230 V
120 V
Trend Recorder
Percentage
Numerical
1 % to 5 % in 1-% steps
0.2 V to 500.0 V
10 min, 30 min,
1 h, 2 h, 4 h, 6 h, 12 h, 24 h
E50417-H1040-C522-A4, Edition 03.2018
Setting Range
File generation
every:
1 h (fix)
2 h (fix)
2 h
4 h
6 h
12 h
24 h
SICAM Q100, 7KG95xx, Device Manual