✧
Click Display.
The determined results are displayed in a Find result table. In multi-paged tables you can navigate forward
and back in the pages using the >> and << buttons.
8.4.2.3 Mains Signalling Voltage
Default Settings and Setting Options
Table 8-38
Start time
End time
Detection time
Measurement output
To display the values on the screen, proceed as follows:
✧
In the navigation window, select the Evaluation and data management menu and click Mains signalling
voltage.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Mains Signalling Voltage
Parameter
Default Setting
Current time
No setting, only display
-none-
Table
8 Operation at Use of a PC
8.4 Value View and Evaluation
Setting Options
Any with calendar function
Time format: depends on date/time
format config.
Detailed information generated as
the list in the corresponding data
format depending on the
parameterized data type and mains
signalling frequency.
Table
Diagram
239