Table of Contents
Advertisement
8.3.4.2 User-Defined Screens
In the User-defined screen menu you can parameterize up to 4 different User screens. Each Screen type
allows you to select whether to display the measured values numerically (2 or 4 measured values) or
graphically and numerically (2 or 3 measured values). To select which of the 4 screens is presently displayed
on the device, you must use the device softkeys and the HTML page.
Default Settings and Setting Ranges
Table 8-9
Parameter
Screen type
Screen name
2 measured values, numerical
Display 1, numerical
Display 2, numerical
4 measured values, numerical
Display 1, numerical
Display 2, numerical
Display 3, numerical
Display 4, numerical
2 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
3 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
Display 3, graph./num.
Display x, graph./num.
(x = 1 to 3)
Min value
Max value
1)
If you have not made any selection, the displays explained in the following do not exist.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Settings of User Screens
-none-
USER_SCREEN_x
(x = 1 to 4)
-none-
-none-
-none-
-none-
1.0
10.0
(unit according to
measured value)
Default Setting
1)
-none-
2 measured values, numerical
4 measured values, numerical
2 measured values, graphical + numerical
3 measured values, graphical + numerical
Max. 18 characters
Only English and German letters,
numbers, and special characters are
permitted.
Acc. to list box
(see chapter 15)
Acc. to list box
(see chapter 15)
Acc. to list box
(see chapter 15)
Acc. to list box
(see chapter 15)
The minimum and maximum value are
defined by the selected parameters (see
chapter 8.3.3.1.1).
8 Operation at Use of a PC
8.3 Configuration of the Device
Setting Range
159
Advertisement
Table of Contents
