Siemens SICAM Q100 Device Manual page 219

Table 8-33
Maintenance password
Audit log password
User language preselection
Session time-out is to set the time after which your user interface logs out if you have no actions during that
period. For example, if the parameter Session time-out is set as 10 minutes (default), the user interface logs
out automatically after 10 minutes if there are no user interactions.
However, in the following cases your user interface logs out automatically even though the set Session time-
out has not run out:
• You stop the whole Internet Explorer process.
• A new connection request comes while all the 16 sessions are occupied and your session is the one which
does not have user interactions for the longest time.
NOTE
However, if the user interface stays on pages with the following remark at the right bottom, you must log out
manually:
Page will refresh automatically, please log out manually if needed.
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Device and Language Settings
311299
444444
DEUTSCH (DE)
8 Operation at Use of a PC
8.3 Configuration of the Device
6 to 14 characters
Arbitrary:
• Numbers
• Small and capital letters
• Basic special characters
6 to 14 characters
Arbitrary:
• Numbers
• Small and capital letters
• Basic special characters
DEUTSCH (DE)
CHINESE (CN)
219