Siemens SICAM Q100 Device Manual page 194

8 Operation at Use of a PC
8.3 Configuration of the Device
8.3.7.3 Communication Serial via RS485 Interface
Default Settings and Setting Ranges of the Communication Serial
Table 8-23
Parameter
Bus protocol
Device address
Baud rate
Parity
Access rights
Communication supervision time
Baud rate
Parity
194
Communication Serial Settings
Modbus RTU
Bus Protocol Modbus RTU (Slave)
1
19 200 bit/s
Even
Full
600 * 100 ms
Bus Protocol Modbus RTU Master
19 200 bit/s
Even
Default Setting
-none-
Modbus RTU
Modbus RTU Master
1 to 247
Acc. to list box
(see chapter 15)
Acc. to list box
(see chapter 15)
Full
Read only
0 s = none
100 ms to 6 553 400 ms
Acc. to list box
(see chapter 15)
Acc. to list box
(see chapter 15)
Setting Range
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018