Table of Contents
Advertisement
8 Operation at Use of a PC
8.5 Maintenance
The following table shows examples of events logged in the audit log.
Table 8-41
Password change
Modification of security-relevant
parameterization
Firmware update
Logon succeeded
Logon failed
Value forcing
Configuration access
Configuration change
Audit log access
Time/date change
Device reboot
SD card plugged
260
Audit-Log Events in SICAM Q100
Event Type
Description
Change following password:
• Activation password
• Maintenance password
• Logon password
• Audit log password
Modify following settings:
• IP address
• Modbus TCP access rights for port 502
• Modbus TCP access rights for user port
• Modbus RTU access rights
• Device name
Upload new firmware to the device
The correct logon password is entered.
Incorrect logon password has been entered for 3 consecutive
times.
Delete or reset the following data:
• Operational log, error log, and transient log
• Min/max values
• Load profile
• Energy counters
• Events like voltage event, frequency event, voltage-
unbalance event, MSV event, RVC event
Upload a configuration file or start configuration
Change the configuration
Access the audit log with the correct password
Change the time or the date
Device is rebooted due to:
• Firmware upload
• SD-card formatting
• IP-address change
• Default-gateway change
• Subnet-mask change
• Default IP setting change
• User-language change
• Network-type change
• IED-name change
• IEC 61850 enable
• Power-quality values for PN and PP setting change
• Voltage RMS value PN and PP setting change
Plug in an SD card
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018
Advertisement
Table of Contents
