User Mask Function; Plc Functions; Multi Language Support; Ecu Interface Customizing - ComAp IG-NT Reference Manual

User Mask function

In GenConfig you can easily set any object in Screen Editor to show or hide based on activation of particular
Logical Binary Input available for users. Below, there is diagram showing the setup of User Mask function in
Screen Editor.
Select the proper function
Show = appears when LBI gets active
Hide = disappears when LBI gets active
None = no function
Select the object
Select which User Mask is used for
this object
N :
OTE
Masking of screens in InteliVision 5 supports only Show function
Use also other masking functions (masking can react on several internal states, e.g. activation of Timers).

PLC functions

See description in IGS-NT-Application Guide 05-2013.pdf.

Multi language support

NT family controllers support up to five Languages that is possible to switch during controller duty. Every
terminal (i.e. Remote display or PC-InteliMonitor) can be switched to different language. Use PC-GenConfig
- Translator tool to translate texts to another language.
Default application archives contain all texts in English only.

ECU interface customizing

The list of available ECU interfaces can be found in GenConfig / Modules / ECU list.
Inteli NT MINT, SW Version 3.0, ©ComAp –May 2013
47
IGS-NT-MINT-3.0 Reference Guide.PDF