ComAp IG-NT Reference Manual page 195

can be obtained from the tab Languages in GenConfig. Index 1 is always english.
Group: Date/Time
Setpoint: Time stamp act
Group Date/Time
Range [units] DISABLED, ENGINE RUNNING, ALWAYS [-]
Related FW 3.0
Description The setpoint selects the Time stamp function mode.
DISABLED
ENGINE RUNNING
ALWAYS
Setpoint: Time Stamp Per
Group Date/Time
Range [units] 1 .. 240 [min]
Related FW 3.0
Description The setpoint adjusts the time interval for Time stamp records. See also the
setpoint
Setpoint: #SummerTimeMod
Group Date/Time
Range [units] DISABLED, WINTER, SUMMER, WINTER-S, SUMMER-S [-]
Related FW 3.0
Description The setpoint is used to select the mode of automatic daylight saving time change.
DISABLED
WINTER
SUMMER
WINTER-S
Inteli NT MINT, SW Version 3.0, ©ComAp –May 2013
IGS-NT-MINT-3.0 Reference Guide.PDF
The function is disabled.
While the engine is running the Time stamps records
are recorded into the history log with period adjusted
by setpoint
The Time stamps records are recorded into the history
log with period adjusted by setpoint
all the time while the controler is switched on.
Time stamp act.
The automatic change to daylight saving time and back is
disabled.
The automatic change is enabled, the current season is winter
and the controller is located in the northern hemisphere.
The automatic change is enabled, the current season is
summer and the controller is located in the northern
hemisphere.
The automatic change is enabled, the current season is winter
Time Stamp Per.
Time Stamp Per
195