ComAp IG-NT Reference Manual page 103

N
OTE
In the case that more IV displays are connected they all behave the same (they
are all clones of each other).
N
OTE
The binary inputs for external buttonst may be the following (depending on used
application): GCBButton, MCBButton, MGCBButton, FDRButton, BTBButton,
FaultResButton, HornResButton, StartButton, StopButton etc.
Setpoint: DispBaklightTO
Group Basic settings
Range [units] OFF, 1-240 min, NO TIMEOUT [min]
Related FW 3.0
Force value YES
possible
Force value YES
possible
Description This setpoint adjusts timeout after which the display (internal display or IS display
#1) backlight is switched off.
N
OTE
When IntelliVision is used this setpoint does not adjust its behavior. Its backlight is
adjusted by internal IntelliVision "setpoint".
OFF
NO TIMEOUT
Inteli NT MINT, SW Version 3.0, ©ComAp –May 2013
IGS-NT-MINT-3.0 Reference Guide.PDF
:
:
:
The backlight is off all the time
The backlight is on all the time
103