ComAp IG-NT Reference Manual page 223

Units -
Related FW 3.0
Description The value contains remaining time of the currently running system process timer.
The name of the timer is available in the value
Value: ECU DiagSource
Group Info
Units -
Related FW 3.0
Description This value indicates from which source the ECU diagnostic messages are beeing
received. The source depends on ECU type.
Value: NextTime1-4
Group Info
Units -
Related FW 3.0
Description This value contains time of next activation of the timer block 1-4 (i.e. of the output
TimerAct
N
OTE
More information about timers is available in the chapter
Value: NextDate1-4
Group Info
Units -
Related FW 3.0
Description This value contains date of next activation of the timer block 1-4 (i.e. of the output
TimerAct
N
OTE
More information about timers is available in the chapter
Value: NextTime5-8
Group Info
Units -
Related FW 3.0
Description This value contains time of next activation of the timer block 5-8 (i.e. of the output
TimerAct
Inteli NT MINT, SW Version 3.0, ©ComAp –May 2013
IGS-NT-MINT-3.0 Reference Guide.PDF
1-4). The related date is available in the value NextDate1-4.
:
1-4). The related time is available in the value NextTime1-4.
:
5-8). The related date is available in the value NextDate5-8.
Timer text.
General purpose
General purpose
timers.
timers.
223