ComAp IG-NT Reference Manual page 114

DISABLED
ENABLED
Setpoint: AirGate IP
Group Comms settings
Range [units] max. 32 characters [-]
Related FW 3.0
Description This setpoint is used for entering the domain name or IP address of the AirGate
server. Use the free AirGate server provided by ComAp at address
airgate.comap.cz if your company does not operate it's own AirGate server.
Setpoint: SMTP authent
Group Comms settings
Range [units] DISABLED, ENABLED [-]
Related FW 3.0
Switch this setpoint to ENABLED position if your
Description
authentificated access. You have also adjust
password. Ask your internet provider or IT manager for this information.
N
OTE
Most of public free SMTP servers require authentification. You will get instructions
when you register to the freemail service.
Setpoint: SMTP user name
Group Comms settings
Range [units] max. 32 characters [-]
Related FW 3.0
Description Use this setpoint to enter the user name for the SMTP server if
authentification
Setpoint: SMTP password
Group Comms settings
Inteli NT MINT, SW Version 3.0, ©ComAp –May 2013
IGS-NT-MINT-3.0 Reference Guide.PDF
This is a standard mode, in which the controller listens to the
incoming traffic and answers the TCP/IP queries addressed to
him. This mode requires the controller to be accessible from
the remote device (PC), i.e. it must be accessible at a public
and static IP address if you want to connect to it from the
Internet.
This mode uses the "AirGate" service, which hides all the
issues with static/public address into a black box and you do
not need to take care about it. You just need only a connection
to the Internet. The AirGate server address is adjusted by the
setpoint AirGate
:
is enabled.
addr.
SMTP server
SMTP user name
requires
and SMTP
SMTP
114