ComAp IG-NT Reference Manual page 222

contains information about controllers with addresses 1-16.
Value: GL32
Group Info
Units -
Related FW 3.0
Description Bits of this value show "1" if the controller which has address corresponding with
the bit position has GCB closed. Bit 0 represents address 1 etc. This value
contains information about controllers with addresses 17-32.
Value: Engine state
Group Info
Units -
Related FW 3.0
Description Code of the current state of the engine control. The text representation of each
code can be obtained following way:
Value: Breaker state
Group Info
Units -
Related FW 3.0
Description Code of the current state of the breaker control. The text representation of each
code can be obtained by the procedure described at the value
Value: Timer text
Group Info
Units -
Related FW 3.0
Description Code of the currently running system process timer. The text representation of
each code can be obtained by the procedure described at the value
Remaining time of the timer is available in the value
Value: Timer val
Group Info
Inteli NT MINT, SW Version 3.0, ©ComAp –May 2013
IGS-NT-MINT-3.0 Reference Guide.PDF
1. Open the archive in GenConfig and use the function File -> Generate Cfg
Image -> Comm. objects to create a list of all communication objects.
2. Open the file, find the row containing this value and look for the column
"Type". The column "Type" contains reference to a list of codes and their
representations located in the bottom part of the file.
Engine state.
Engine state.
Timer val.
222