ComAp IG-NT Reference Manual page 319

P
ULSE
Binary output: RemoteControl1
Related FW 3.0
Description This is a general purpose output, which can be closed and opened remotely, e.g.
from InteliMonitor using the "Remote switches" tool or via MODBUS using the
register #46361 and command #26.
N
OTE
See the Remote switches chapter in the InteliMonitor help for details about how to
control the output from InteliMonitor and the Modbus chapter in the latest
communication guide for information about control the output using Modbus.
Binary output: RemoteControl2
Related FW 3.0
Description This is a general purpose output, which can be closed and opened remotely, e.g.
from InteliMonitor using the "Remote switches" tool or via MODBUS using the
register #46361 and command #26.
N
OTE
See the Remote switches chapter in the InteliMonitor help for details about how to
control the output from InteliMonitor and the Modbus chapter in the latest
communication guide for information about control the output using Modbus.
Binary output: RemoteControl3
Related FW 3.0
Description This is a general purpose output, which can be closed and opened remotely, e.g.
from InteliMonitor using the "Remote switches" tool or via MODBUS using the
register #46361 and command #26.
N
OTE
See the Remote switches chapter in the InteliMonitor help for details about how to
control the output from InteliMonitor and the Modbus chapter in the latest
communication guide for information about control the output using Modbus.
Binary output: RemoteControl4
Related FW 3.0
Inteli NT MINT, SW Version 3.0, ©ComAp –May 2013
IGS-NT-MINT-3.0 Reference Guide.PDF
Button X to opened or closed depending on previous state (it is
changed to the opposite state).
ON Pressing the button issues log. binary output User Button X to
close for one second.
N :
OTE
Repeated pressing of button during the closed period (one
second) causes issuing another puls of length of one second to
be generated from the moment of button pushing.
:
:
:
319