Binary output: Common Al
Related FW
3.0
Description
The output is closed while there is at least one alarm of the Alarm only type
present in the alarm list. The alarm can be in any state, i.e. active unconfirmed,
active confirmed or inactive unconfirmed. See the chapter
more information.
Binary output: Common Hst
Related FW
3.0
Description
The output is closed for 1s when any alarm of History record type appears. See
the chapter
Binary output: CommonActLev 1
Related FW
3.0
Description
The output is closed while there is at least one 1st level (yellow) alarm present in
the alarm list. The alarm can be in any state, i.e. active unconfirmed, active
confirmed or inactive unconfirmed. See the chapter
information.
Binary output: CommonActLev 2
Related FW
3.0
Description
The output is closed while there is at least one 2nd level (red) alarm present in the
alarm list. The alarm can be in any state, i.e. active unconfirmed, active confirmed
or inactive unconfirmed.See the chapter
Binary output: Alarm flashing
Related FW
3.0
Description
This is the flashing alternative of the output Alarm, i.e. the output flashes with
period 1s/1s while the output
Binary output: Horn flashing
Related FW
3.0
Description
This is the flashing alternative of the output Horn, i.e. the output flashes with
period 1s/1s while the output
Inteli NT MINT, SW Version 3.0, ©ComAp –May 2013
IGS-NT-MINT-3.0 Reference Guide.PDF
Alarm management
for more information.
Alarm
Horn
is closed.
Alarm management
Alarm management
Alarm management
is closed.
for
for more
for more information.
293
Need help?
Do you have a question about the IG-NT and is the answer not in the manual?