Displays Of The Operator Panel With Display - Siemens SIMOCODE pro C System Manual

8.3.3.2

Displays of the operator panel with display

You can navigate through the menu using the arrow keys and softkeys. Each menu item
may have one or more submenus. The menu structure and display are, in part, directly
dependent on the device parameterization (e. g. selected control function) and hardware
configuration (e.g. type and number of expansion modules used).
● Main display
The "main display" is the standard display of the SIMOCODE pro. It displays current
measured values, which can be selected via profiles predefined to meet user-specific
requirements. For detailed information: See "Read and adapt main display (Page 112)"
● Measured values display
The "Measured values display" provides an overview of all values measured by
SIMOCODE pro. For example, all phase currents, phase voltages, power-related
measured values or temperatures. For detailed information:
See "Display of measured values in the measured values display (Page 115)."
● Status display
The "Status display" shows all higher-level status information, i.e. all status information
relevant to the protection and control of the motor. For detailed information:
See "Motor protection and motor control status (Page 117)."
● Statistics/Maintenance
The "Statistics/Maintenance" menu item provides an overview of all SIMOCODE pro
information that is primarily relevant to maintenance. For detailed information: See
"Display of statistical and maintenance-relevant information on the statistics/maintenance
display (Page 119)."
● Communication
The "Communication" menu item displays all important information concerning fieldbus
communication. For detailed information: See Status display for fieldbus communication
(Page 120)
● Device I/Os
The "Device I/Os" menu item provides a complete overview of the current status of all
inputs and outputs of the basic unit as well as any connected expansion modules. For
detailed information: See Displays the current status of all device I/Os (Page 122)
● Parameters
SIMOCODE pro V allows selected parameters to be set using the operator panel with
display: For detailed information: See Parameters (Page 124)
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
Description of system components
8.3 Operator panel with display
109