Mounting, wiring, connecting, system interfaces, configuration guidelines
12.2 Wiring, connecting
Terminal assignment of the decoupling module
The following table shows the assignment of the removable terminals:
Table 12- 17 Pin assignment of the removable terminals of the decoupling module
Terminal
Assignment
Upper terminals
Lower terminals
SPE
System shielding
1)
1)
Note
Connect SIMOCODE pro via terminal SPE with the maximum possible cross-section and
with as short a cable as possible to the functional ground of the control cabinet,
e.g. to the grounded mounting plate of the control cabinet.
220
—
System Manual, 05/2019, A5E40507475002A/RS-AD/004
SIMOCODE pro