Siemens SIMOCODE pro C System Manual page 82

Description of system components
8.1 Basic units (BU)
SIMOCODE pro C basic unit
Basic unit pro C is the fundamental component of the SIMOCODE pro C device series and is
used in conjunction with a current measuring module and optional operator panels.
The following motor control functions are supported:
● Overload relay
● Direct starter (direct-on-line starter) and reversing starter
● Circuit breaker control (MCCB).
SIMOCODE pro S basic unit
Basic unit pro S is the fundamental component of the SIMOCODE pro S device series and is
used in conjunction with a current measuring module and an optional operator panel. As
compared with the basic unit, SIMOCODE pro C provides the following expansion options by
means of connecting a multifunction / expansion module:
● Increased device functionality with additional inputs and outputs
● Connection of a residual current transformer
● Connection of a temperature sensor.
The following motor control functions are supported:
● Overload relay
● Direct starter (direct-on-line starter) and reversing starter
● Star-delta starter
● Circuit breaker control (MCCB)
● Control of a soft starter.
82
System Manual, 05/2019, A5E40507475002A/RS-AD/004
SIMOCODE pro